Showing results in  Forum [Show all channels]

Sort by: Relevance | Newest first | Oldest first

• '93 Rover 214 front brake pads 25 Jul 2007 (Forum)
  my front brake pads need changed now if not sooner:) Anyone experience of these? I've done plenty of the old Ford type with pins that need drifted out and Toyota ones that you undo a bolt and half the caliper swings up out the way but these look a bit different again. I've not got a workshop manual
• VW Polo - brake fluid change query 31 May 2007 (Forum)
  I have a 2005 VW polo 1.2 twist and it is going in for a service this weekend, VW have offered to changed all the brake fluid but this will cost a whopping 80 pounds! is it worth it? The car has done 34,000 miles and it is all motorway, this car is very rarley used for any journey under 30 miles
• VW Passat Brake wear 17 Jun 2005 (Forum)
  Hi, I Have a Passat 4motion Estate 1.9Tdi (130). It has been in for it's first service after 17000 miles (long life). I have been told that the brake pads need to be changed. The rear pads are 90% (1000ish miles to go) worn and the front are 60% worn (10,000ish miles to go). I know alot
• Brake pad life. 8 Apr 2005 (Forum)
  What sort of life do Backroomers get from front brake pads these days? Our Fabia tdi has done 76,000 KM, (47,500 miles) and ours are, according to the dealer OK.The first ITV (MOT equivalent) is now due, so I particularly asked for them to be checked. I would have expected no more than 30-35,000
• Seized brake piston?? mk 3 fiesta 10 Feb 2005 (Forum)
  After changing the pads on my mk 3 fiesta i have noticed the passenger side caliper piston does not seem to move when i put brake pedal down. I was wondering if it is seized but i can lever it out with a screwdriver and push back with my hands. I had this piston out of it's bore completely would
• Primera Brake/ABS Problem 6 Feb 2005 (Forum)
  Hi, This is my first post, but I have been lurking for ages :) I have a (W/2000) 1.8 Primera Sport, when braking all is fine until it drops down to about 5mph when it feels like the ABS is kicking in, but the light does not come on. The car stops fine, The ABS light works properly according
• Mazda 323 brake rattle 21 Dec 2004 (Forum)
  . They fixed it again but within 35miles it was back. They said it was something to do with disc brake. Anybody any other ideas?
• Peugeot 405 brake bleeding 29 Aug 2004 (Forum)
  I tried to bleed my brakes on my pug 405, but when i tried to loosen the nipple in the front caliper, the nipple just snapped. I don\'t want to try the other side incase i do the same again. I tried to loosen the nipple by the usual fashion of unscrewing anti-clockwise. Does anyone know if you
• What paint for brake drums? 4 Aug 2004 (Forum)
  The brake drums on my Mondeo are not looking too pretty. They rather detract from the alloys. I would like to improve the general appearance by restoring the drums to a black / matt black finish. What is the best paint for drums? Exhaust paint? Will normal paints stand up to the heat generated
• Omega back brakes 20 Oct 2003 (Forum)
  I am having great difficulty in extracting the inner back brake pad on the drivers side of my omega - it just dosent seem to want to budge. Any help would be gratefully received. If I could get it out I can push back the piston ok. my difficulty is in shifting it initially so that I can extract
• Brake Pipes 7 Oct 2003 (Forum)
  Normally if I need to replace fixed brake lines I get one made up (in copper) at the local motor factors. Last time I looked though I saw cupro-nickel pipe for the same purpose. What's the difference? I thought the addition of nickel would be to prevent corrosion, but copper doesn't, so I'm
• Handbrake 'failure' 4 Jul 2003 (Forum)
  is attached to the rear brake shoes but can someone explain how it affects the brake pedal? I would have thought the brakes would be applied via the handbrake and 'bypass' the pedal.
• Brake squeal / cleaning alloys 22 Feb 2003 (Forum)
  You lot seem unusually sharp by comparison to the 'net norm so here's a quick theory question: Why does grease on the back of pads stop brake squeal? I've cured it a few times in my life but can't figure out why it happens in the first place...... Also, does anyone have a recommendation
• MR2 pulling when braking 8 Apr 2002 (Forum)
  Dear all, If you recall some weeks ago l posted a problem with my lady's MR2 pulling to the right when braking. I've been on holiday, come back and thought l would find out what was up with it, (she had had it serviced in my absence). Oh she said, only seems to happen on the same turn in the road
• peugeot 406- 2.1 diesel estate - disc brakes 9 Feb 2011 (Forum)
  Hi How easy,or hard is it to put new  front discs on the 406/2.1 diesel estate Cheers
• Who stepped on the gas not the brake big time ? 26 Sep 2009 (Forum)
  Not a retired person, Oh no ! http://news.bbc.co.uk/1/hi/england/8275944.stm One life less for the passenger?
• Brake Pads for Vectra Sri 04 3 Apr 2006 (Forum)
  Can anyone suggest what would be classed as "good" pads for the front of my Vectra? Are the Dealer's pads as good as any at comparible cost?
• VW GOLF MK4 2003 pd 130. engine code ASZ - Brake ABS Hydraulic Unit 15 Aug 2014 (Forum)
  Hello HJ readers, I am hoping someone can give me some advise please. I have lost my trusted independant mechanic and about to arrange a fluid service on my 11 year old Golf ( that I have owned from new). I know the clutch & brake hydraulics share a common master
• Ford KA, KA2, KA3 (1996 - 2008) - 02 1.3 MOT - Brake Pedal Travel 30 Aug 2009 (Forum)
  Hi there My Ford KA failed its MOT yesterday. On the failure sheet it said ?insufficient reserve rear brake pedal movement? and the guy at the garage said that there was too much travel in the pedal. I presume this means it goes to far towards the floor with the engine running. I have done
• Nissan Micra (2003 - 2010) - 06 1200 Brake / Steering Squeal 18 Jun 2009 (Forum)
  Hi all, I just recently had a full service on my car, which included having the rear brakes cleaned out and new pads being installed to the front brakes. Since this was done (at a garage in Cheshire), I drove back over to the other side of the country where I live and all seemed to be fine