What is life like with your car? Let us know and win £500 in John Lewis vouchers | No thanks
Refine by channel: Forum (3152) Ask HJ (1086) News (104) Article (24) FAQs (10) productReview (4)
Sort by: Relevance | Newest first | Oldest first
-
fiesta 1.4 tdci zetec 2008 - ongoing idle problem 5 Aug 2014 (Forum)
as if it was exaggerating the idle problem... iv already had my injectors seals done and my injectors checked they are fine iv also changed my oil and replaced my air filter... recently had a diagnostic done and showed up my maf sensor was not working so iv replaced that and check the wiring all is in order but problem -
Renault Megane 2003 1.9dci - Loss of torque 13 May 2013 (Forum)
Hi, After the replacement of the mass airflow sensor the turbo started to leak oil into the exhaust. So the turbo was replaced too and the garage asked me to let the new turbo bed in and not drive in a way to use the turbo for a 50 miles or so. I also used feul cleaner to allow -
Mercedes 220 CDI - Intercooler and /or turbo noise 12 Apr 2013 (Forum)
hi Guys i really need some good advise about my car and the noise that i experience a while ago. after start i can hear a hard blow off or whiz from under the bonnet and the noise coming from where`s the intercooler / turbo.if i open the bonnet i can see some oil around the front -
Ford Focus - Is the garage lying to me? 22 Mar 2013 (Forum)
Apologies up front for my descriptions as I know very little about car engines. I took my car (1.6 HDI focus estate) into the garage on Friday for a full service and MOT. Due to the miliage they also said it needed its timing belt changed which I agreed to. When I went -
Vauxhall Astra G Petrol 2002 1.4 LS 16V Z14XE - Misfire Cylinder 3 16 Jan 2013 (Forum)
Hi. I have an 02 plate Astra 1.4 16V engine type Z14XE, which has misfired on Cylinder 3. This isn't the first time this has happened (about the 6th or 7th) I've had the plugs changed twice, new coil pack, new ecu, new egr, and a software update but the problem still seems -
Volvo S40 - Sign of impending clutch failure? 15 Jul 2012 (Forum)
of curiosity) seems to agree and quoted £1100 to replace. Does this sound right or could there be a different explanation? I am not really willing to pay that and it's already due to go in on Weds for oil/filter change which will cost about £200 and also needs 4 new tyres in next 3 months -
Mazda 6 petrol - smelly exhaust 6 Jul 2012 (Forum)
o2 sensor was lazy. Changed the cat and front o2 sensor which is a 5 wire 2 plug with second hand one,s which i was told was working fine on car they came off but the egg smell is still there. Engine starts fine, drives fine, plenty of power does low 30's around town,on motorway -
Peugeot 106 - New Head Gasket - won't start 17 Dec 2011 (Forum)
and all was fine - so it's not the problem. I've gone back over it all and re-checked all connect iona that I disturbed - and still the same. It was working fine before hand - never had a problem starting it in 11 years. Changed head gasket because it was starting to leak oil badly along front edge -
Ford Ka - Ford Ka 1.3 Endura - One oily spark plug - Help!! 1 Dec 2011 (Forum)
. Each time cylinder 3's spark plug is fouled. It is black and has oily deposits on it. I changed the spark plug each time and misfire goes away for about 3 weeks -
Audi A6 1.9 tdi 2001 - Juddering when accelerating from low gears 30 Jul 2011 (Forum)
Hi - for a while now we have had an intermittent 'judder' when accelerating. Normally we would stop the car, turn off engine wait 5-10 seconds and re-start and the judder would stop. I was told it could be that the car hadn't been serviced for a while and that an oil filter change may resolve -
Vauxhall Astra G Petrol - Air Conditioning - Please help! 1 Jul 2011 (Forum)
for about two days, and then just stopped. I took it back in and they used a dye to check for leaks, but there weren't any, and the system was still fully gassed and oiled. When pressing the switch, apparently the compressor wasn't kicking in. However, the switch itself seems -
Renault Megane Coupe-Cabriolet 2005 1.6 petrol - intermittent camshaft knocking 15 Apr 2011 (Forum)
light comes on and stays on. ive had the oil and filter changed.used a fuel additive to remove any carbon deposit on the valves and had the camshaft sensor changed.the ecu light stays off after resetting until the engine is cold .When i start it from cold the camshaft ? knocks -
Do I need a special tool to get my 2003 Ford Focus' sump nut off? 9 Aug 2010 (Ask HJ)
My 2003 Ford Focus' sump nut has rounded off. Is there a tool to get the sump nut off so I can replace it? -
Renault Laguna II (2001 - 2007) - 04 2.2 When is inspection/renewal of glow plugs re 3 Dec 2009 (Forum)
This 2.2DCI SpTr Auto has done 73K mls and will be 6 years old soon. It is used for long journeys, runs as it should - probably because of this and it is well looked after by me with 5w/40 synthetic oil changes at 1/2 the specified "intervals". I would be grateful for advice from a diesel engine -
Antifreeze - a cautionary tale 31 May 2009 (Forum)
Apart from the obvious don't drink it . . . . . . Somewhere along the line I have had 2 different types of antifreeze mixed in my car. Don't know the names of them TBH but the one in the car was the new pink long life type apparently. When I got a coolant change some 18 months or so ago it would -
Vauxhall Corsa C (2000 - 2006) - 03 1.3 alternator 24 Jan 2009 (Forum)
looked every were and got one from vauxhalls to my suprise it was cheaper than any where else fitted it myself then about 3 weeks later the niose started again so took tensioner off took the roller off and soaked it in motor oil put it back on car and the horrible noise has gone that i was getting -
SAAB 9-3 Convertible (2003 - ) - Servicing & preserving the manufacturer's warranty 29 May 2008 (Forum)
The wife's Saab 93 convertible is a year old at the end of May and, therefore, needs its first annual inspection. In Saab terminology this is an "intermediate service" i.e. nothing more than a check and an oil change. The first dealer I rang quoted a not insubstantial £256 for this which I think -
Peugeot 306 (1993 - 2001) - 1998 1.9TD - Fan/Aux Belt 27 Oct 2007 (Forum)
Changed the engine on my pug 306 4/5 months mainly thanks to my mate. I particularly remember what a pig the aux/fan belt was to get back on. In the last few weeks i have been getting a whirring noise coming when idle. Yesterday this sounded worse, also a clicking could be heard when turning over -
Proton Persona Coupe - h/brake & caliper 29 Jun 2007 (Forum)
garage to remove calliper and fit new pads might sort the situation out, does the fact that it catches in 2 places mean the whole assembly might be damaged in some way, Accident?? Any help as always very much appreciated, if this does not cost too much im going to attempt and oil change myself!! Jon -
Cavalier Sri Ecotec top end rattles 3 Nov 2006 (Forum)
changed the oil & filter (Sae 15/40) but this has made little difference. The engine mgmt light also sometime comes on when first started, but by quickly flicking the ignition off/on it goes away. I have shorted out the pins on the diag plug but no fault code shows up according to the flashing mgmt