Hi Guys, need pointing in the right direction......
I bought a 2004 Mazda 6 TS2 last week with 48000 on the clock. Test drove it and it was ok but within a week it has started making a sort of rubbing/grinding noise which sounds like it is coming from the offside front wheel. It almost feels as if the brakes are rubbing but had them changed and it still does it but it doesnt do it all of the time, does it mostly when at about 40mph and when going round a slight bend. sounds like a throbbing sort of noise. Thought it may be a wheel bearing but with only 48000 on the clock im not so sure.
I had a front wheel bearing changed on my 2005 Mazda 6 TS2 a few years ago, with only 40k-odd miles on the clock - very poor.
Mine was the usual symptom of a rumbling/droning noise that increased or decreased in volume depending on whether you threw it round a left or right-hand corner. There was no excessive play in the wheel, so this alone is not a good indication of a dodgy wheel bearing IMO, incidentally.
Glad I didn't tackle it on my own - the garage said it was a hell of a job to do !
The only other work I've had done in that area was the front brake shims being replaced under warranty with uprated versions, due to a squealing noise.
|