Hi Guys, hope someone can help. We have just swapped an Endura in our Focus, this is timing chain and belt and we have used the original pump and injectors as they were new 6 months ago. Ive done all the stuff, cashaft slot correct, pin in the pump and pin in for crank but no matter what she refuses to run, there is fuel at the injectors by the tanker load but she will only run on the naughty gas. Im beginning to think maybe there is a "coding" problem but if the immobiliser was not seeing the Bosch pump surely there would be no fuel up to the injectors??? This is driving me nuts, Ive tried withpout the pins as if it were No4 but its just the same. Can any kind soul throw any light on this, any clues would be greatly appreciated. Cheers