Ford Focus TDCI 2005 - Camshaft/Crankshaft position sensor

Honest John Back Room » Technical matters
View Threaded
Fri 6 May 2011 21:17
Ford Focus TDCI 2005 - Camshaft/Crankshaft position sensor - focuskev

Are the camshaft sensors and crankshaft sensors the same thing and would failure of these cause completely dead non starts?

Reply | Report as offensive | Link
Sat 7 May 2011 08:50
Ford Focus TDCI 2005 - Camshaft/Crankshaft position sensor - jc2

No to the first question-yes to the second.The crankshaft sensor only gives position of the crank,not which stroke it's on-that's why you need a camshaft sensor as well.

Reply | Report as offensive | Link
Sun 8 May 2011 08:56
Ford Focus TDCI 2005 - Camshaft/Crankshaft position sensor - focuskev

Thanks. So would I also be right in saying that breakdown of the crankshaft sensor would contribute to absolute no turn,crank or fire when the ignition is attempted and could this be intermittent from a faulty sensor?

Reply | Report as offensive | Link
Sun 8 May 2011 09:28
Ford Focus TDCI 2005 - Camshaft/Crankshaft position sensor - Railroad.

The crankshaft sensor tells the ECM engine speed and position. The camshaft sensor tells the ECM cylinder identification. Both will prevent the engine from running if they fail on a TDCi.....

Reply | Report as offensive | Link