|
i need help or advice on removing the drives from the gearbox on my subaru 97, its a japeneese import(excuse the spellin) thanx btw it has to be done asap
|
If you don't get an answer on this forum try
bbs.scoobynet.com/forum
|
Makes no difference whether its an Import or UK model. The arrangement is the same although the ratio's maybe different depending on your model.
As already said, your best to go to Scoobynet where theres a wealth of info and help from the scooby boys. But I think the easiest way of doing a clutch once you've taken the drive shafts off is to remove the complete enging and gearbox.??
Good luck
|
I've paid someone to do a clutch change on one of my scoobies. I got to the place whilst they were still putting it back together so i know that they didn't take the engine out. I do know there there's a lot of other parts that do need removing including some of the suspension.
'Sorry that I can't offer any more advice other than to say that you're very brave tryign this yourself if you need the car back on teh road quickly.
--
I read often, only post occasionally
|
|
|
