Hi,
I need to enter the code in to a Grundig R100 car Stereo, however cannot workout how to do so.
When turning on the unit the display just says SAFE, please see the following link
tinyurl.com/2e8d7
Any Vauxhall tech's out there ???
Thanks
|
From memory, (as my manual is in the boot of the car, in the car park)
Make sure ignition is switched on, hold down button AS and turn on the stereo. Wait for the beep, then release button AS. Display should now have 4 dashes ----. Enter correct code using the radio preset buttons 1 to 4. Once code is entered, press and hold down button AS again until code is either confirmed or denied. WARNING - you only have a max of 10 attempts to get it right, but if still no luck after the 8th attempt, STOP and contact a Vaux dealer.
|
|
|
