| Hello,
 I have a 2008 Vectra 1.9 cdti.  The engine produced a P0400 code (EGR  Valve) last week.  I replaced the EGR valve today with a new one and  cleaned the Idle Control Valve (Throttle Body).  However the engine still revs (the RPM needle bounces  up and down between 1000 RPM and 3000 RPM) a few times on its own when I  depress the clutch.  This happens randomly and there is no discernable  pattern.
 
 Also the car tends to surge forward when I am driving for no apparent  reason.  Sometime the engine seems  to temporarily lose power when I am  driving.
 
 In summary I have:
 Replaced the EGR Valve
 Cleaned the Idle Control Valve (Throttle Body)
 Confirmed the swirl flap rod is still in place
 No Fault Codes Present Cleaned the MAP Sensor Installed New Air Filter Can anyone help me with the problem?Thanks in advance.
 |