I have a 2004 fiesta & am currently installing a Microscan 400 series alarm.
-- having a bit of a nightmare working out how to wire-in the indicators & courtesy light circuit
Tried the fuse box, can't find anything - wired the alarm wires for the indicators into the column switch originally & this didn't work
I have a copy of the Ford TIS CD but the wiring diagrams on there confuse the hell out of me
Please can someone tell me where to wire-in the alarm triggers for the indicators (L & R) & the interior light circuit
many thanks in advance !!!
|
>>having a bit of a nightmare working out how to wire-in the indicators & courtesy light circuit
Not certain of this make.But assuming wires are long enough you will need to splice circuit on both indicators. ie either side.and join..preferably as close to front indicator lights as possible..Interior I think is Green/red tracer. ie earth feed to interior light..May be wrong so check this before trying
--
Steve
|
|
I think TIS was made to confuse! It's a shame there's not a Haynes manual for it yet.
|
Your not joking, the TIS is not very good - no wonder the Ford garages don't know what they're doing half the time !!!
---
thanks for the info Steve, I'll have a look
---
would be great if any sparky's / alarm guys out there could help me out a bit more - must be someone who's installed an alarm on a new Fiesta --- please ????
|
|
|
DOORS AND BOOT (interior Light)
SWITCHES
Connect to the BLACK/BLUE wire, at the position nr.3 in the dark grey connector,under the steering column, driver?s side.
DIRECTION INDICATORS Connect to the BLUE wire, at the position nr.7, and to the BLUE/RED wire
position nr.6, in the light blue connector in the under the steering column,driver?s side.
|
|