Peugeot 3008 2013 - What's the lowest tyre pressures I can run without

Honest John Back Room » Technical matters
View Threaded
Mon 3 Aug 2020 13:17
Peugeot 3008 2013 - What's the lowest tyre pressures I can run without - CHRIS.K

What's the lowest tyre pressures I can run without chewing up my sidewalls?

Reply | Report as offensive | Link
Mon 3 Aug 2020 13:25
Peugeot 3008 2013 - What's the lowest tyre pressures I can run without - Gibbo_Wirral

I don't understand the question.

Surely you should be running at the pressure it says on the sticker on the door pillar?

Reply | Report as offensive | Link
Mon 3 Aug 2020 14:12
Peugeot 3008 2013 - What's the lowest tyre pressures I can run without - gordonbennet

Is this a way of softening ride due to low profile tyres?

It won't work, by lowering the tyre pressures the chances of tyre and wheel damage on our ruined roads are higher possibly leading to nasty instant deflation of a front wheel at speed, if the idea is to make ride more acceptable then the best solution is smaller wheels with higher profile tyres.

Reply | Report as offensive | Link
Mon 3 Aug 2020 14:59
Peugeot 3008 2013 - What's the lowest tyre pressures I can run without - Andrew-T

What's the lowest tyre pressures I can run without chewing up my sidewalls?

This sounds too much like a spoof to me ..... Why would you want to worry about chewing up sidewalls ? More important to worry about rolling a tyre when cornering.

Reply | Report as offensive | Link
Mon 3 Aug 2020 15:53
Peugeot 3008 2013 - What's the lowest tyre pressures I can run without - sammy1

Try 22psi and work down until your steering fails. I would not recommend you drive at more than 10mph preferably not on a public road

Reply | Report as offensive | Link
Tue 4 Aug 2020 00:30
Peugeot 3008 2013 - What's the lowest tyre pressures I can run without - edlithgow

Tyre Tuning Tips Taiwan

https://tw.forumosa.com/t/new-tires-experience-michelin-pp2/36528/3

On re-reading that, I note a critical omission, if like me, one doesn't know.

What level of rollover is the target of the optimisation?

Is the idea just to get it as low as possible, or is there some "acceptable" level?

OP is long gone so can't be asked. Bunch of clowns on there now.

Edited by edlithgow on 05/08/2020 at 00:54

Reply | Report as offensive | Link

From choosing the right tyre to what to do when it goes wrong - we have the answers.

Tyre News And Advice