What is life like with your car? Let us know and win £500 in John Lewis vouchers | No thanks
Most recently answered technical issues questions
I have a 2012 Vauxhall Corsa, it's done around 25,000 miles and recently it has been juddering as I go up the gears. I took it to the garage and they put it through diagnostic machines and no fault could...
Our Ford Fusion (2003 model) engine radiator fan has just stopped working but kicks in when we turn the A/C on (and the water leaks out of the pressure cap on water bottle). We've just bought a new thermostat...
My car is a 2012 Audi A6 Avant, which I bought from a local Audi dealer when it was six months old. Today, the driver's side window stopped working. Should I complain to the dealer? The vehicle's warranty...
I purchased a new Skoda Yeti last year, but have experienced problems with the battery and engine start/stop ever since. The dealer recharged the battery and it fixed the problem for a while, but in recent...
I recently bought a 2007 Audi A6 Avant 2.0 TDI. It had previously been sitting idle for a month or two, but drove fine on the trip home. However, after a few days it struggled to start, before braking...
Is it possible to retro fit my 2011 Ford Kuga 2.0TDCI with a dashboard symbol that will warn me when the ECU triggers a DPF regeneration, so that I know not to switch off the engine till it has finished?
My Audi A3 makes a lot of noise. It sounds like air rushing into the car from one of the windows (even though they are all shut) I have taken it back to the dealer and they fitted a new wheel bearing under...
My Ford Fiesta is only three years old, it has done 65,000 miles and the clutch feels a little stiff and hurts my knee. Do you think replacing the clutch would make a lot of difference or not?
My 2014 Nissan Qashqai at 19,000 miles has clutch judder, from stationary and between gear changes. It does not appear on local or modest trips, but on long journeys, or as last weekend in a massive very...
The heater fan on my Vauxhall Astra doesn't work. It used to work only in setting four, and then stopped working altogether. Replaced the resistor pack but it still isn't working.