HI all,
I hear all this talk of "scanning codes" from ECU's to help diagnose problems. What would I need to scan the codes on my car with an ABK engine and Bosch (I believe) ECU. I have heard of a ross tech cable and VAG.COM, is that right. Also where do you plug these into the car?
|
Tim
You should have the white two-pin plug in the underbonnet fuse box. VAG-Com would be the best; but other VAG 2-pin scanners will also work and there may be flash codes available too.
Have a look on the ross-tech site; must be plenty on there.
|
Thanks SL
I have the Vag.com application, do I need the floowing cables to connect to my car?
tinyurl.com/6no83g
and
tinyurl.com/5938vo
Tim.
|
Tim
I'm not up on whether these counterfeit Chinese VAG-Com cables actually work. I have heard that some cause problems.
I'd recommend that you use the genuine items as then you can get excellent back-up and code support from their UK-based agents.
|
|