just changed my rear pads and now the handbrake just pulls right up. how do i adjust it? It used to be nice and tight before I changed the pads. And yes the cable is still connected to the caliper.
|
Did you pump the pedal hard a few times?
You may also have to take up some slack manually for the h/brake.
|
yeah, pedal pumped until nice and firm.
tried pulling handbrake up and down loads and it wont adjust.
One thing that could be the probelm - One side of pads not changed on the rear as waiting to collect a new caliper tomorrow as the old one is seized. will this be the cause? If anythingm i would think it would be tighter with new pads on one side?
|
Caliper problems on these will cause handbrake trouble.Also check the handbrake cables,very common to seize.Handbrake adjustment is automatic unless it has had a modified handbrake lever fitted with manual adjuster.hth
|
|