What is life like with your car? Let us know and win £500 in John Lewis vouchers | No thanks
1999 - hfx sagem ecu will not start - jimster
i have a motor that will not run i have had the ecu tested, i have also tried a control relay and a crank sensor all to no avail!!!! i am getting a single injector pulse when i first crank the engine but thats it. plaease help i can't take much more

Edited by Dynamic Dave on 28/01/2008 at 19:42

1999 - hfx sagem ecu will not start - injection doc
hi Jimster, have you checked crank signal to ECU whilst continually cranking? have you checked relay to see if the relay is staying in?, have you checked coils & wiring to coils incase you have a short. wiring a little notorius on Peugeots. have you carried out test's on ign switch as they do wear? is it still imobilized?. Have you tried a spare key?. I bet its got two alarm systems, say's me with a smile.
Inj Doc
1999 - hfx sagem ecu will not start - jimster
yes indeed it has a toad alarm fitted but when the ecu was sent away they put a blank chip in and bypassed the immobiser.
1999 - hfx sagem ecu will not start - jimster
i have continuity between the coil pack and the control relay and between the injectors and the control relay.
what made you say about the two alarms?
1999 - hfx sagem ecu will not start - injection doc
Hi Jimster, Have you checked for a feed to injector & have you checked to see if ECU is switching injectors? .Are you getting a spark? I still think you need to check engine live data perhaps by towing it down the road . May have a wire gone to earth pulling a signal down.
Doc