My Honda Africa Twin motorcycle has twin headlights. Both have dip and main. One has had a small hole (1.5cm) punched in it by a stone. I have used a repair kit on the hole and also installed clear acrylic protectors. There is no effect on the illumination from the light. Will this fail an MOT?
Many thanks
|
Providing the front plastic isn't a lens and the beam is defined by the reflector you should be ok.
I had an old Renault 5 that had a stone hole filled with araldite and it always got through the MOT
|
Winner's bikes they are :^D
Check out www.xrv.org.uk (Be sure not to type in .com at work like I did at work once by mistake........)
|
Thanks for the replies. As an aside and for interest - its actually a French import that I bought new in 1998, consequently the lights dip the wrong way and its never failed any of its 6 MOTs so far! (It has not been tested by the same place it got the bike)
|
|