|
hi,anyone know what size spanner/socket to fit bolts on heat shield on 1.4 ford focus year 2000,10m/m to loose and a/f sizes not good fit am trying to replace front exhaust pipe and manafold. thanks in advance davey.j
|
they will most likely have corroded a bit
i would use heat then hammer a slightly smaller worn socket on or mole grips if there was room
sorry no easy answer
|
|
thank.s bell boy will give it a go just did`nt know if the bolts were 6m/m for 10m/m socket or a strange a/f or unc thread type. thanks again. davey.j
|
|
|
