Morning all. I know this might sound silly to all you good mechanics out there, but could someone be as kind as to tell me how to change the spark plugs on a Rover 414i (N reg, new shape).
I doesnt look like the plugs I've come across before where you take off the cover and unscrew the plugs. There an injection unit running across the top of this lot.
Any help for a novice like myself is much appreciated.
Regards,
Dave
|
If you remove the plastic cover that says rover on it.Plugs are underneath it.Held on by two screws. to the right and centre of cam cover you will see where the plug leads enter below the cover.HTH
--
Steve
|
|
HT leads can be a bit tight just pull hard! Plugs are recessed down quite a way.
--------------
Mike Farrow
|
Thank you both for your help. Found is easy.
Easy when you know how (",)
Regards,
Dave
|
|
|