Hi guys, I had both complete driveshafts replaced over the weekend, however I am not happy with one of the CV boots, please see pictures I uploaded on imageshack:
imagizer.imageshack.com/img924/9159/URpfBO.jpg
imagizer.imageshack.com/img923/2558/tyDLU4.jpg
imagizer.imageshack.com/img923/6153/zgOxK2.jpg
imagizer.imageshack.com/img923/5641/4QGFdw.jpg
imagizer.imageshack.com/img924/7836/YkRFXS.jpg
imagizer.imageshack.com/img922/3451/RDbwz6.jpg
imagizer.imageshack.com/img922/4372/F38Jlo.jpg
imagizer.imageshack.com/img923/5406/3vUEi9.jpg
imagizer.imageshack.com/img924/2218/KG5FBS.jpg
I bought the part from GSF car parts, and it was fitted by my colleague mechanic. I know mechanic is good as I used him for years, and I was always extremely happy with his work.
It's like it's not stretched enough, which I believe might cause damage in the future.
This drive shafts were installed as they came out of box, so they came out like this from factory. I was thinking about taking that metal clip out to stretch it further, and then apply new clip. However, I'm hesitant as that might void the warranty. I just don't like to sit and wait until something happens.
What do you guys think ?
|