My car is intermittently misfiring, usually at motorway speeds. Sometimes it is lumpy on startup for a few seconds too.
Before I did anything, I scanned for codes a cylinder 3 misfire came up. Replaced all coils and plugs, checked wiring and cleared the code, and all was well for a few days. Cylinder 3 is misfiring again now and the same code is coming up.
Someone suggested the crank sensor. Would this really only cause cylinder 3 to misfire?
|
Unlikely to be the crank sensor for 1 cylinder misfire. I would be looking at a mechanical problem , possibly a low compression issue on that # 3 cylinder.
|
Oh dear...thank you, I will investigate further! This could get expensive.
|
|