Buy your self a "Cylinder leak down tester"
round £40 on Ebay.
Now this tool that will fit any combustion engine is fairly easy to use and EXTREMLY accurate,
It will determine if the is any leaks from rings/gasket/valves/valve guides or ANY other place.
As long as you have a compressor,
even a little one you fit the tool into the plug hole with cyl at TDC and charge it to 100 psi and the second gauge reads the holding pressure.
So 100n in say holding atany less than near 100 say 70 and all you have to do is listen for where the air is coming out from.
Intake?then an intake valve is suspect,same with exhaust ETC.
Practically idiot proof.
So much so I don't even remember where my compression gauge is it's been so long since I used it!
Do yourself a favour and buy this tool.
All that said it does sound like the pressure relief valve is faulty.
|