Jaguar XF 3.0D S 275 bhp - Confirming the Correct Discs, Pads and Wear Sensor - hatman

I am going to replace the front and rear discs and pads on my 2015 X250 XF 3.0D S - it has 355mm discs on the front as I believe all facelift (2012 - 2015) X250 3.0D S models had. Before going ahead and ordering, I'd greatly appreciate it if someone could confirm the discs, pads and sensors below are correct for the car.

Can I also confirm I will only need 2 pad wear sensors in total? (One for the front and one for the rear) Is the front pad sensor different given the discs are bigger than the rear?

Am I right in assuming I need to buy the pads with the piston clip?

What do Autodoc mean when they describe the pads as "without accessories?"

Front Discs: BREMBO COATED DISC LINE 09.B556.11 Brake Disc :

www.autodoc.co.uk/brembo/8714174?search=BREMBO%20B...0(09.B556.11)

Rear Discs: BREMBO COATED DISC LINE 09.B312.11 Brake Disc :

www.autodoc.co.uk/brembo/7611786

Front Brake Pads: BREMBO P 36 027 Brake pad set:

www.autodoc.co.uk/brembo/7280455

Rear Brake Pads: BREMBO P 59 042X Brake pad set:

www.autodoc.co.uk/brembo/18109743

Front Pad Sensors: BREMBO A 00 460 Brake pad wear sensor:

www.autodoc.co.uk/brembo/8217099

Rear Pad Sensors: BREMBO A 00 461 Brake pad wear sensor :

www.autodoc.co.uk/brembo/10567376

Many thanks in advance.

Jaguar XF 3.0D S 275 bhp - Confirming the Correct Discs, Pads and Wear Sensor - elekie&a/c doctor
If you want to be sure , measure them before you order replacement. I’ve seen Range Rover models where someone hasn’t done their homework and fitted the wrong size discs .
Jaguar XF 3.0D S 275 bhp - Confirming the Correct Discs, Pads and Wear Sensor - Andrew-T

As you seem to be ordering from Autodoc, I would have thought that telling them your Reg and VIN details they would be able to check everything for you ? (assuming your car has not suffered any mods, of course .... )

Edited by Andrew-T on 13/08/2023 at 17:22

Jaguar XF 3.0D S 275 bhp - Confirming the Correct Discs, Pads and Wear Sensor - gordonbennet

As Elekie Doc says, measure them yourself.

Worth the time removing the pads and stencil them by pressing both sides onto cardboard.