Corsa 1.3 cdti - Dual mass flywheel - Michael Potts

Hi everyone I have a corsa and I think the dmf is knackered . Gear changes are a bit notchy and it won't go into reverse without crunching Also if you have it in first gear with the clutch pedal pressed and you rev it it will slightly start to pull forward .. Like the clutch isn't disengaging It also has some vibration when driving and also when it's in neutral The vibration varies with the revs I just want some confirmation it's definately the flywheel??

Is it a big job to do myself.? The car is only 300 quid and it's a run about so thinking of throwing a second hand one in. Any special tools or anything specific I need to do. Thanks

Edited by Michael Potts on 16/12/2019 at 02:58

Corsa 1.3 cdti - Dual mass flywheel - elekie&a/c doctor
No point in fitting a second hand clutch/flywheel assy, it could be worse than the one you already have . Book time for this job is around 4 hours or less . Depends if you have the correct tools and no grief getting things apart. m.youtube.com/watch?v=jDmYUChrzL0