Hello,
The pull mechanism on the stalk should operate the front windscreen wash and set off the wipers for 3 or 4 wipes, however, it sets off the wipers but no screen wash, all the other operations work on the stalk. The rear wash works but when the stalk is pulled for the front wash no pump noise can be heard.
Is it likely to be the stalk module within the steering column?
Thanks
|
Probably not.These early Clio models have 2 wash pumps ,one front and one for the rear.Both are in the front washer reservoir .hth
|
hmmm, not the answer I was hoping for but thanks anyway, can i swop pipes somehow and re-route the back pump to pump to the front?
|
Yes you can.Best way is to remove/release the washer bottle from the bodywork as the pipes and wiring are a tight fit against the bulkhead.hth
|
thanks, I'll give it a go, if it stops raining.......
|
|