can anyone tell me how to connect a flashing led light, which is to be mounted on the dashboard, directly to the battery. I can't find an obvious route from the dashboard to the battery. Or is there another way to connect it so that it flashes to give the impression that an alarm is fitted. thanks
|
if you buy a relevant 12 volt flashing led from maplins you could always wire it to the constant live on the ignition switch
|
Thanks for that but I'm not very good with electrics, could you talk me through how to do it, pleeeeeeeeese. Thank you in anticipation
|
Get a flashing red LED.Wire it fom the supply to the ignition switch to the output from the switch.When ignition is on-both are same voltage no flashes.but when off,12v.across light.
|
Brilliant thanks for that, I'll give it a go. regards
|
|