Hi,
Just wondering if anyone can help, my pug won't start even though the engine turns over and everything electrical seems fine.
I opened the top of the injector unit, where while running you can see fuel going into the intake. While a friend fired the engine I could see no fuel going down :(
Although this might not be fuel pump I am not ruling it out!
Also I have checked the fuses and they all seem fine.
If anyone has any advice I will be very grateful.
-meanwhile I am going to replace the fuel filter and check the 'out' hose of the fuel pump to see if any fuel is passing while the engine is being started.
Thanks in advance.
correction inserted to the final paragraph on behalf of the poster
Edited by Pugugly on 08/06/2008 at 19:19
|