Ford Fusion (2002 - 2008) - 04 1.25 No oil seal on rear hubs | Technical matters | Back Room Forum | Honest John

What is life like with your car? Let us know and win £500 in John Lewis vouchers | No thanks

Thu 17 Apr 2008 21:23

04 1.25 No oil seal on rear hubs - obbig

Hi, I've got a Mazda 2 which I think is based on the fusion. I took the rear drums off a few days ago and was surprised to find that there were no oil seals fitted. It looks like one of the bearings is leaking a bit of grease and this may end up on the pads. Is is possible to fit an oil seal?
Many thanks for any advice.

Edited by Pugugly on 18/04/2008 at 21:22

Reply | Report as offensive | Link

Fri 18 Apr 2008 21:22

04 1.25 No oil seal on rear hubs - Pugugly

Bump.

Reply | Report as offensive | Link

Fri 18 Apr 2008 22:52

04 1.25 No oil seal on rear hubs - kithmo

Most wheel bearings (if not all) are sealed for life units with the seals built in, so if it's leaking grease it means a new bearing is required.

Reply | Report as offensive | Link