Pug 406 multifunction display

Honest John Back Room » Technical matters
What is life like with your car? Let us know and win £500 in John Lewis vouchers | No thanks
View Threaded
Tue 8 May 2007 16:05
Pug 406 multifunction display - 406xsara
Replaced the battery on 2001 pug 406 a few days ago.
Battery was disconnected for a few minutes and now the multifunction display is blank.
Everything else is fine - no fuses in the 28 fuse, fuse box or in the engine bay fuse box appear to be blown.
The backlight is working but the display is blank?
Could the display be blown?
Someone mentioned fuses on the BSI unit. Anyone know where this is located?
Any help would be greatly appreciated.

Reply | Report as offensive | Link
Wed 9 May 2007 10:19
Pug 406 multifunction display - 406xsara
Anyone got any ideas?
This is starting to bug me...
According to the Haynes wiring diagram, the radio stalk control etc. goes through the display and all of these work fine.
There is no changer just in dash cd - this is also fine.
I'm still hoping transistors in the display have blown and a second hand display might sort it.
Any help would be appreciated.
Reply | Report as offensive | Link

Looking for a garage you can trust? Honest John's Good Garage Guide has thousands of reader recommended garages, plus how-to guides and tips on servicing.

The Good Garage Guide