Mondeo Heater Fan inop pos'n 1,2,3 - bikemade3
Anybody changed the heater balance resistor/ control pack as it may be known. Suspect it's gone U/S as the fan now only works on selection 4.

It's a known common fault,but just want to make sure that the improved resistor pack Ford now offer is compatable with my 1997 model in terms of wiring colouring.

Thanks in advance.
Mondeo Heater Fan inop pos'n 1,2,3 - grease monkey
new resistor pack comes as a kit with a partial wiring loom attached,just splice it in to the existing wires & your good to go !!
--
if it aint broke don`t fix it
Mondeo Heater Fan inop pos'n 1,2,3 - bikemade3
if it aint broke don`t fix it

Totally agree, this afternoon it's kicked into life and so far appears to working, on all speed settings.
Mondeo Heater Fan inop pos'n 1,2,3 - Altea Ego
If it aint broke and you didnt fix it - it will break again.
------------------------------
TourVanMan TM < Ex RF >