Hi there,
I have a "simple" problem with the back wiper on my Rover 220SD (1997), it just runs continuously, it never stops (that was until I disconnected it). I was told it was probably the relay that was faulty. But where is it located on a ROVER 220SD so I can change it.
Thanks in advance for your help !
|
Think you will find its the motor.They have poor fitting seals to tailgate.Ie water finds its way into housing of the wiper motor.. corrosion takes its toll.Very common on these
--
Steve
|
As an update.On my 200 the wiper motor had burned out through water ingress.The relay was also U S due to leak from rear light cluster..And if you havent found relay yet (may be different on yours)Its located behind rear O/S light cluster should be a green box..Fiddly to remove though.Ie remove panel to lamp cluster- relay is mounted on bracket bolted to cluster...
--
Steve
|
|