Can anybody assist with a fault on a 2020 renault traffic business.
Comes up check stop start, active fault, cannot be cleared.
Read codes with autel DF083 STOP START MODULE CIRCUIT INCORRECT SIGNAL
Snap-on diag shows DF0043 stop start configuration error.
Battery tested to be in good health and BMS on negative terminal shows around 1.6 volts varying.
I switched the battery and the BMS terminal with one of a different van and made no difference to the fault, still wouldn't clear. Autodata has no wiring diagrams for the vehicle so I don't know what voltages and resistances to expect from bms or alternator.
Any suggestions on diagnostics or where to look to confirm the fault?
|