How many miles should it take until the engine is run in ?
If all they have done is change the rings it will never run in properly (or possibly at all). Replacing the rings and doing no other work is a bodge. For the rings to stand any chance of bedding in the bores need honing to provide a surface for the new rings to bed into. The original bores will not have enough of the original honing marks left after several years of use.
But that requires a full engine strip (not a simple remove head and sump) which is expensive and I guess your garage will have done the cheapest job possible.
But since one of the cylinders is significantly worse than the others its clear to me that bore has suffered significant wear (or damage) and I guess the only way to sort that would be a rebore to all 4 cylinders and new oversize pistons (if they actually make them for this engine) and that will be expensive, possibly more than a Mini of that age is worth.
But if I am checking oil everyday, sometimes a few times a day, could this be why my oil is going down as it loses a tiny bit each time I wipe the dipstick?
Or is this just wishful thinking that my car isn’t burning oil?
The oil you wipe off the dipstick will be 1/2 of nothing, its wishfull thinking I am afraid.
If the car is actually running OK I would just continue to use it and check the oil regularly (whatever you are confortable with). 5 litres of BMW spec oil can be bought from Asda for £15 and that would last you 15,000 miles of top ups. I had a car that iused a pint every 300 miles and it ran fine and the cahp who bought it form me never had any issues. Car died in its mid teens and had used oil from the day I bought it at 3 years old. I replaced the valve stem seals when the head gasket failed but it made no measurable difference.
With regards to checking the oil level providing you use the same method every time preferably in the same place you will be fine. Most cars now demand the drive, wait and dip method but I still prefer the first thing in the morning before starting method.
Edited by thunderbird on 16/02/2020 at 13:00
|