Whilst I agree on the whole with HJ's fondness towards the good old fashioned torque converter automatic, being generally much more reliable than an equivalent automated manual such as DSG, PDK, Easytronic, I-Shift etc.. let's not forget there have been some real clangers made!
It concerns me that HJ is recommending the new PSA EAT8, it's somewhat unproven and, well, French cars do have a reputation for slushboxes made of, ahem.. cheese!
Honda seem to have had a hard time making reliable gearboxes, (not singling out the Jazz BBD!) and in fairness it does seem to be their only weak point.They get quite a hard time in the US over this for obvious reasons. www.hondaproblems.com/transmission-failure/ and wheels.blogs.nytimes.com/2011/01/08/honda-transmis.../ and video, excuse the loud voice, he's partially deaf... : www.youtube.com/watch?v=BycsYMQEED8
Chrysler have an awful reputation with their automatic gearboxes, each new generation promises to be better than the last, but they can't seem to crack it. Failures at 50k miles are all too common.
Mercedes have been up and down in this regard, but on the whole seem to hold up.
Ford automatics are hit and miss (not the powers*** or the newest t/c which are too new), some models, such as the Mk 1 and 2 Mondeo were notorious in the US where it was sold as the Contour for eating gearboxes.. but then we have JohnF's focus which soldiers on without maintenance!
ZF appear to vary by application for obvious reasons, too much to quantify really although i'd sooner have an Aisin.
Jatco (Nissan) used to be fairly good, not so much these days, particularly the CVTs which keep blowing!
I have no real idea about Hyundai/Kia gearboxes, but perhaps that's a sign they're doing quite well with their home-grown gearboxes. They did have a reputation for being a tad slow shifting 'lazy' on the old Sonatas.
Honourable mention goes to the Astra H, which had a wonderful design whereby the automatic transmission cooler pipes are directed through the main radiator for cooling. Inevitably these crack or corrode, mixed fluids = bye bye gearbox! and that was an Aisin unit!
Not all torque converter boxes are made equal.
Rant over and out..
Edited by Metropolis. on 10/01/2019 at 21:38
|