My daughter’s Fiat Punto mk2, has been pass MOT last month but it need to attention the front sub frame for the next MOT. Because it is very rust but it not make hole when you poke your finger in. I have took it off the frame and put Hammerite Kurust on then rub with wire brush clean it off with my high pressure water jet. 90% of rust is off.
Then it was dry to apply a three coats of red oxide prime to killed and stop the rust being more development in the future.
But should I apply a Hammerite waxoyl underbody seal or just the original black gloss spray?
|