Hi all
I was wondering if anyone could give me some advise on how to approach the following issue:
For a little while when I went to close my drivers door it would bounce back as if it were hitting the seat belt...I know now that it propably wasn't...Anyway last week I was on my way to a hospital appointment and it did the same thing, I looked at the lock latch and it was loose but I needed to close the door to get to my appointment...now know that was a mistake. Now I can not open the door, the outside handle is just loose and the inside handle will not open it either. When I lock/unlock the car with the fob or manually by pushing or pulling on the handle all handles including the drivers side handle do move as they should, but the drivers door still will not open. So I am assuming the latch is stuck and nothing is pulling on it to lift it.
I think I can get the inside card off since there are no bolts or screws that I can not get to but I have no idea what to do once I have done this. There also seems in videos to be another door card with bolts that stops you getting to the lock mechanism...pretty much all videos and advice stop at this point. so I have no idea about this, I would be grateful if anyone can give me any information, advise on this. Also:
Can I for example lift, move the latch so that I can open the door?
With the outside handle been loose could that have broken from the mechanism, and would that lead to the inside handle not working?
Am I probaly going to have to replace the whole locking mechanism and if I get a second hand one is there any reprogramming or anything involved, or is it just a straight swap?
Thanks for reading and any advise on how I should proceed with this would be great.
|