I had the clutch actuator fitted to my wife’s corsa about a year ago and it worked fine. The car has now developed the same fault:
· will sometimes not crank over with an F on the display panel.
· Sometimes will be fine
· sometimes will start, but will not go into gear.
It is in the garage now and they have given me the fault codes:
P1703 Present – Brake light switch signal CAN-bus malfunction
U20105 Not present – CAN-Bus no comms with ECM
P0505 Not present – Idle speed signal CAN-Bus malfunction
P1700 Not present MIL request via CAN
P0110 Not present – Intake air temperature signal CAN-Bus malfunction
P1895 Not present – Engine Torque Signal CAN-Bus malfunction
P1896 Not present – Engine Torque request signal Can-Bus malfunction
P0725 Not present – Accelerator pedal position signal CAN-Bus malfunction
P0115 Not present – Engine coolant temperature signal CAN-Bus malfunction
Garage say it needs gearbox strip down to see what is wrong - doesn't sound righjt to me. Anyone got any ideas?
|