What is life like with your car? Let us know and win £500 in John Lewis vouchers | No thanks
Fitting a new brake caliper to Zafira
I need to fit a new rear brake caliper to my Vauxhall Zafira because the handbrake actuator has stopped working. However, I wish to use the existing half worn pads, what is the correct procedure for extending the piston to take up the wear?
Asked on 15 November 2016 by Roger Mawby
Answered by
Alan Ross
So we assume that you have fitted the new caliper, and that the old pads are to be fitted. Given that you have not disconnected the hydraulic system. If so then you just need to pump the brake pedal a few times and the pads should self adjust. Remember to check the fluid level in the reservoir afterwards
Tags:
technical issues
brakes
Looking for a garage you can trust? Honest John's Good Garage Guide has thousands of reader recommended garages, plus how-to guides and tips on servicing.
The Good Garage GuideSimilar questions
We bought a car from a small garage in November. Before we got the car it needed an MOT and service, which the garage did for us as part of the deal of buying the car.
When we got the car we first checked...
Any ideas please on a soft/long brake pedal on a 2014 Ford Focus 1.6 diesel. I have bled the brakes and the pedal is better but then gets softer over the course of the next two/three weeks? I have checked...
Our 2010 Fiat 500 has developed an intermittent high pitched squeal which seems to come from the front wheels (difficult to tell but seems to be RHS). Sounds like disc and pad rubbing as the squeal disappears...
.jpg)
