What is life like with your car? Let us know and win £500 in John Lewis vouchers | No thanks
Focus in limp mode
I bought 52 plate Focus TDCI and while driving it the glow plug light started coming on and flashing at 70mph - the engine cut out on a dual carriageway, so I pulled over with no power steering and stopped. After ten minutes it started again and I got a further 20 miles - same again. Got started and home, but what to do now?
Asked on 8 July 2012 by wee scot
Answered by
Alan Ross
Well your engine is going into limp mode, this is because one of the many sensors fitted has failed.
It could be the glow plugs but could could also be one of the sensors.
Best thing to do would be to have a diagnostic check carried out. This should then show up as a fault code ie P ---- 4 numbers.
It could be the glow plugs but could could also be one of the sensors.
Best thing to do would be to have a diagnostic check carried out. This should then show up as a fault code ie P ---- 4 numbers.
Similar questions
My Renault Trafic 1.9 DCi glow plug light comes on and goes into limp mode. It also wont rev over 2000 and emits lots of white smoke from the exhaust. Can anyone help?
My 2005 Ford Mondeo 2.0 TDCi has done 147,000 miles. It had a previous issue where the glow plug light would flash and it would go into limp mode. I read various posts on here and it seemed that the arm...
3 weeks after the emissions fix to my 2009 SEAT Exeo 170 estate, the glow plug warning light flashed continuously and limp mode activated. I visited the the SEAT main dealer twice which resulted in the...
Elsewhere on 
.jpg)
