peugeot 306 2.0 hdi - car cut out now wont start

Honest John Back Room » Technical matters
What is life like with your car? Let us know and win £500 in John Lewis vouchers | No thanks
View Threaded
Sun 24 Feb 2013 19:12
peugeot 306 2.0 hdi - car cut out now wont start - Rob H 85

hi i recently tried to fix a cooling fan problem (wouldnt come on) i relized a relay was missing so i replaced (whilst car was running) the fan kicked in then cut out as did the car now the car wont start.

i checked all fuses they were fine but i did relize that the fuel pump stopped whirring when key was turned, i tested the pump from the ecu relay / fuel control module(not sure what its called its a double relay behind ecu). i bridged pin no. 8 and 4 and the fuel pump kicked in.

could this just be down to the ecu relay being blown or is it more likely to be something else like me frying the ecu. i dont want to start throwing parts at things.

thank you all in advance

Reply | Report as offensive | Link
Sun 24 Feb 2013 20:30
peugeot 306 2.0 hdi - car cut out now wont start - mickeybo

If your pump runs when you bridge terminals 8 & 4 then the problem is with your 15 terminal double relay needs replaced Hth Regards Mickeybo

Reply | Report as offensive | Link
Sun 24 Feb 2013 20:47
peugeot 306 2.0 hdi - car cut out now wont start - Rob H 85

this is the thing i was hoping to hear thank you for reply, hope it is just that, i am a trainee tech and having a hard time solving this prob on my own car.

Reply | Report as offensive | Link