206 1.6 hdi 110 - Dual Mass Flywheel Gone?

Honest John Back Room » Technical matters
View Threaded
Sat 12 May 2012 22:20
206 1.6 hdi 110 - Dual Mass Flywheel Gone? - Deedee85

Just wondering if anybody knows if there should be any play on the clutch plate when twisted? I'm in the middle of changing the clutch on my 206 (not recommended to anybody btw) and the actual clutch plate has about 3-4 inches of movement on it where it's attached to the flywheel. I know the flywheel has springs in it, but I have no idea how tight they're supposed to be.

Any help would be greatly appreciated. Thanks in advance :)

Reply | Report as offensive | Link
Sun 13 May 2012 13:57
206 1.6 hdi 110 - Dual Mass Flywheel Gone? - Peter.N.

I haven't changed one - yet, but I suspect that it shouldn't have that ammount of movement on it. I would be inclined to change it for a solid one as you have it out, you won't have to worry about it again.

Reply | Report as offensive | Link
Sun 13 May 2012 14:43
206 1.6 hdi 110 - Dual Mass Flywheel Gone? - elekie&a/c doctor

Suggested "play" should be between 15-30mm rotational and max 2mm rock between inner and outer masses.hth

Reply | Report as offensive | Link
Mon 14 May 2012 00:36
206 1.6 hdi 110 - Dual Mass Flywheel Gone? - Peter.N.

There is your answer.

Reply | Report as offensive | Link
Tue 15 May 2012 20:41
206 1.6 hdi 110 - Dual Mass Flywheel Gone? - daview

just had the same on my zafira....changed it to a solid one!

Reply | Report as offensive | Link

Looking for a garage you can trust? Honest John's Good Garage Guide has thousands of reader recommended garages, plus how-to guides and tips on servicing.

The Good Garage Guide

Cold-snap snow-how: Advice on coping with the freezing weather, including videos, facts and winter driving advice.

Honest John's Guide To Winter Tyres