Peugeot 307 (2001 - 2007) - 02 2.0 diesel. HDi Limpmode

Honest John Back Room » Technical matters
What is life like with your car? Let us know and win £500 in John Lewis vouchers | No thanks
View Threaded
Thu 21 Jan 2010 00:19
02 2.0 diesel. HDi Limpmode - mickeybo
This 307 was code read at main Peugeot Dealers, A few faults were found exhaust pressure sensor down stream gas tempature sensor these were fitted at the time, most recently started going into limp mode again exchangeed (MAF) sensor with a know'n good one but to no avail on doing some checking using pin data did find at (MAP) sensor plug 3 pin,

"Voltage at all 3 pins"

PIN 1- 4.96
PIN 2- 4.91
PIN 3- 5.90

Removed both multi plugs (ECU) and (MAP) plug, Done some checking from plug to plug also voltage and resistance and all checked out at this point any feedback to this would be greatly accepted

Best Regards

Mickeybo

{There is no need to repeat the year, engine size, and make / model in the subject header as the compulsory boxes you fill in automatically adds those details for you}

Edited by Dynamic Dave on 21/01/2010 at 00:22

Reply | Report as offensive | Link

From which small car to buy at which price point to the best UK-built cars, our Top 10s have the lot. Click now for your shortlist.

Unsure of what to buy? Our Top 10s are here to help you....