Hi I brought a 99 t reg fiesta ghia, but the remote did not work, I have replaced the batteries and now when I press the button the red light comes on but this does not operate the central locking. I have read loads abour re programing it but I have had no luck, these are the instructions ive read
1. Turn Ignition switch to Position I and back to 0 as soon as the PATS LED in the clock lights (The system is now ready for programming, to a maximum time limit of 30 seconds)
2. Remove Key from Ignition, hold the FOB towards the Interior Light, and press and hold the Single Arrow. Wait until the light on the Key flashes, then press the Double Arrow 3 times., release the Single Button
3. Both LEDs (Key & Clock) should flash to acknowledge programming is successful
4. To exit learn Mode, turn Ignition to II and then 0
The pats led in the clock just keeps flashing, when i go through the above steps the light on the ley flashed 5 times but the led next to the clock doesnt so they are not in sync
Any ideas please people!
Thanks
|
Hi. I have exactly the same issue. Were you able to solve this? Thanks.
|
|