My 806 will cut out but not all the time you can go drive it for miles on the motorway at 80+ with no problems, but then as soon as you put your foot down flat to the floor through the gears or need more power to turn up a hill it will cut out if you then turn off ignition and start it again it works fine like nothing happened you can even put your foot down and it wont cut out again, it seem very random. but if you then park up over night or leave for a period of time it go's through the same process again
The engine managment light do come on but after about 4 starts it go's out, the car was going into limp mode before (which is now ok) and i have spent loads on garage bills and parts its had
Tank fuel pump
fuel fillter housing
cam and crank sensors
airflow meter
air fillter
breathers cleaned
this is a new problem and i cant afford to take it back to garage , would this be a problem with the fuel pressure switch or the connector ?
Edited by Dynamic Dave on 17/03/2009 at 09:46
|