Lack of power. This car has been code read with genuine tech 2 at Vauxhall
Codes brought up
P1222 Pump Malfunction Injection
P0600 Swirl Level Control 3.9%
P0380 Glow Plug Voltage Low
Eng Speed Idling 413-425
P0400
P0243
P0110
P0105
P0100
P01105
These codes were erased and car taken for a short drive, brought back to workshop and code reader was placed back on vehicle. Code P0400 reappeared. I've checked EGR valve after removing cover from EGR valve, push on fit. You can visibly see valve working. On doing some checks our self we can see the inlet manifold switch over control. Valve not working owing to return earth wire to ECU not switching all vacuum tests on vehicle or engine management light on vehicle. Ignition on mil light on but goes out on start up
Any feed back greatly accepted
Regards
Paul
Edited to remove SHOUTING, Rob
Edited by Pugugly on 16/03/2009 at 22:44
|
