Hi everyone,
can anyone help, i have a 206 van 1.9 diesel non turbo 2000 x plate i bought the van 6mts ago and nae having mutch luck. first the imobiliser packed in so the garage bypassed it and put a standerd 12v stop solonoid in wirred to the egnition that sorted that problem. now the van sounds like it,s about to blow it chaps like made more so when it is cold and a nightmare to start. i put it into a diesel pump expert and they got back to me saying the timing advance solenoid was u/s so they put on a new one which made it go better but it still chapped so the got it back on the computer then tested wires and fuses and all the sensors and told me everything was in spec but the problem was the timing advance solenoid was getting power and sending a signal to the ecu BUT the ecu was,nt sending signal back to advance or retard timing they said the timing ADVANCE SOLENOID was sitting fully advanced, they said a ecu fault(LUCAS). now i found a other ecu with same numbers and was going to buy that but did,nt know if that would work the garage said it would work as the stop solonoid had been changed to work of the egnition instead of the imobiliser???? so am asking for help and what do you guys think?
many thanks... mark
Edited by Dynamic Dave on 06/02/2009 at 20:54
|
I'm sorry, I just can't adequately decode the above within a reasonable time.
659.
|
|