Is there any reason why changing these shouldn't be a home job? The last we did was my nephews Mondeo which took a while!
Edited by Dynamic Dave on 09/02/2008 at 21:36
|
There is no reason why not just take your time do one side at a time, most folk on here say crack off the bleed nipple and push the piston back, this expell's moisture behind the piston.
I don't bother i just undo the resovoir cap and push the piston back only flipped 1 set of seals in a master cylinder in 20 yrs, maybe i have been lucky! change the fluid if older than 2yrs or not sure if been done.. good luck..
|
|