Peugeot 306 (1993 - 2001) - 1998 TD - fuel stop solenoid

Honest John Back Room » Technical matters
What is life like with your car? Let us know and win £500 in John Lewis vouchers | No thanks
View Threaded
Sun 20 Jan 2008 17:50
1998 TD - fuel stop solenoid - macca3535
I have a fuel stop solenoid fault on my peugeot 306 td 1998 's' reg, Think its XUD type with a lucas pump.

New solenoid costs £300 from peugeot (its the 3 pin type with the immob built into it, can only get a new one as they are a one shot type)

Does anyone know where i can get one cheaper?

Could i use one from a earlier 306 (single wire type) and just put an ignition feed to it?

Any help would be really appreciated.

Many thanks.

Edited by Webmaster on 20/01/2008 at 17:59

Reply | Report as offensive | Link
Sun 20 Jan 2008 18:07
1998 TD - fuel stop solenoid - marty1979
Is this any good? tinyurl.com/2qeck9
Reply | Report as offensive | Link
Sun 20 Jan 2008 20:29
1998 TD - fuel stop solenoid - macca3535
Thank you.

Does it have 3 wires and a black connector at the end of it?

Could u send me some more photos to markmcmanus98@hotmail.com
Reply | Report as offensive | Link
Tue 22 Jan 2008 11:31
1998 TD - fuel stop solenoid - macca3535
Does any1 know if i could put a old single wire type fuel stop solenoid on my 306?
Reply | Report as offensive | Link
Tue 3 Jun 2008 11:30
1998 TD - fuel stop solenoid - stevegee
YES.
You can even run with the solenoid plunger removed, trouble is you have to get out in the rain to stop the engine.
Everythign PUG is expensive $200 for heater hoses, $70 for lower radiator hose, $150 for fog lights.
Crikey

Reply | Report as offensive | Link
Tue 3 Jun 2008 13:33
1998 TD - fuel stop solenoid - Dynamic Dave
Everythign PUG is expensive $200 for ....


Was putting $ a typo, and you meant to have used the £ symbol?

EDIT - ignore, I see from your profile you're from Australia which is why you're not quoting uk currency.

Edited by Dynamic Dave on 03/06/2008 at 13:35

Reply | Report as offensive | Link
Tue 22 Jan 2008 21:01
1998 TD - fuel stop solenoid - marty1979
Thank you.
Does it have 3 wires and a black connector at the end of it?
Could u send me some more photos to markmcmanus98@hotmail.com

Macca, best to ask the seller on this one. If this isn't the one you need he may have it for sale elsewhere?
Reply | Report as offensive | Link
Wed 4 Jun 2008 06:58
1998 TD - fuel stop solenoid - stevegee
Heaps of fuel stop solenoids on ebay but only single wire.

Can anyone explain how the immobilser is supposed to work.

I have a thread elsewhere about the differences between XUD 110 pump and XUD114 pump as fitted to D8A and DHY engines.

I hope my engine does not have an immobiliser fitted.

It stops after 5 minutes and I attributed that to the loss of 12V to Stop Solenoid after a water heated switched opens up.

Looking at the wiring ..
Reply | Report as offensive | Link
Wed 4 Jun 2008 19:24
1998 TD - fuel stop solenoid - Lud
I had a 205 diesel whose stop solenoid went (opens when you turn the key to make the thing drive like a petrol car, so fails closed). At the Peugeot dealer, after telling me the eye-watering dealer price, the young bloke looked over his shoulder and then murmured the name of a local diesel specialist where the same part exactly was priced at half the amount or less.
Reply | Report as offensive | Link
Sat 7 Jun 2008 03:45
1998 TD - fuel stop solenoid - stevegee
QED changeover the blue socket from XUD to XUD114 QED.
Reply | Report as offensive | Link

Looking for a garage you can trust? Honest John's Good Garage Guide has thousands of reader recommended garages, plus how-to guides and tips on servicing.

The Good Garage Guide

From which small car to buy at which price point to the best UK-built cars, our Top 10s have the lot. Click now for your shortlist.

Unsure of what to buy? Our Top 10s are here to help you....