0 to 200 mph using 24 chainsaw engines

Honest John Back Room » Motoring discussion
View Threaded
Wed 24 Jan 2007 18:42
0 to 200 mph using 24 chainsaw engines - Dynamic Dave
Connect 24 Dolmar chainsaws to a 5-speed Harley-Davidson gearbox, and off you go.

www.dolmar.com/755.php

www.youtube.com/watch?v=umZpn610AkE

I read elsewhere about the top speed being 200 mph, and a 0-60 time of just 5 seconds. Can't find that article though.
Reply | Report as offensive | Link
Wed 24 Jan 2007 18:47
0 to 200 mph using 24 chainsaw engines - L'escargot
Cutting edge technology?
--
L\'escargot.
Reply | Report as offensive | Link
Wed 24 Jan 2007 18:54
0 to 200 mph using 24 chainsaw engines - SjB {P}
Cutting edge technology?
--
L\'escargot.


No; they just saw what was possible.
Reply | Report as offensive | Link
Wed 24 Jan 2007 19:43
0 to 200 mph using 24 chainsaw engines - Chicken Vindaloo
Oh that's more than enough of that - I'm calling the Pun Police!!
Reply | Report as offensive | Link
Thu 25 Jan 2007 19:03
0 to 200 mph using 24 chainsaw engines - Dynamic Dave
Oh that's more than enough of that - I'm calling the Pun Police!!


Actually the article I grabbed the info from was titled "Sawn to be wild"
Reply | Report as offensive | Link
Wed 24 Jan 2007 19:01
0 to 200 mph using 24 chainsaw engines - JH
It usually takes me about 10 minutes to start my chainsaw so that's 4 hours to get them all runing (neglect the first few running out of fuel) and then you're off!
JH
Reply | Report as offensive | Link
Wed 24 Jan 2007 19:54
0 to 200 mph using 24 chainsaw engines - Clanger
Outstanding. I think mad stuff like that is great!
Hawkeye
-----------------------------
Stranger in a strange land
Reply | Report as offensive | Link
Wed 24 Jan 2007 20:38
0 to 200 mph using 24 chainsaw engines - Peter D
I saw that before. Regards Peter
Reply | Report as offensive | Link
Thu 25 Jan 2007 16:53
0 to 200 mph using 24 chainsaw engines - milkyjoe
0 to 200 from standing stihl
Reply | Report as offensive | Link
Thu 25 Jan 2007 12:40
0 to 200 mph using 24 chainsaw engines - No FM2R
>I think mad stuff like that is great

I agree, but what a rubbish "arty" video.
Reply | Report as offensive | Link
Thu 25 Jan 2007 21:45
0 to 200 mph using 24 chainsaw engines - martint123
The original post in 2004 had links to the site with much better movies, but they all seem to be dead links now. Much better than that youtube thing. If you could lipread in German, then the rear facing camera would seem to indicate that the rider was praying at one point.
Reply | Report as offensive | Link
Fri 26 Jan 2007 17:12
0 to 200 mph using 24 chainsaw engines - Sofa Spud
I still think the JCB diesel record car with two 4-cylinder digger engines is better!!!!
Reply | Report as offensive | Link
Tue 26 Mar 2019 18:34
0 to 200 mph using 24 chainsaw engines - focussed

I run two Dolmar saws - very good product, reliable, powerful, always start when needed, the last time I used the smaller one it had been in storage for 12 months, It started 3rd or 4th pull.

All the Makita petrol chainsaws are made by Dolmar, as Makita own Dolmar 100%.

Reply | Report as offensive | Link