406 HDI Fuel/Oil Temp Gauge Fault

Honest John Back Room » Technical matters
View Threaded
Sun 11 Dec 2005 16:12
406 HDI Fuel/Oil Temp Gauge Fault - backatthepostbox
Hi,

I currently have a fault on my X reg 2000 406 Rapier Estate (90). On the instument panel the fuel gauge does not work, it sits right at the bottom (empty) end of the gauge and never moves. However the oil temp gauge displays how much fuel I have eg goes to the 'hot' end of the scale when I fill up with diesel and goes down as I use it.

Any ideas what may be causing this or better still how to rectify it.

Thanks
Regards
Max
Reply | Report as offensive | Link
Sun 11 Dec 2005 16:15
406 HDI Fuel/Oil Temp Gauge Fault - Adam {P}
This is a complete guess but assuming this isn't an inherent fault with 406's, it sounds like it *could* be an earth problem.

As to how you're fix it, I'm afraid I've no idea where you'd start. Someone will though soon...
Reply | Report as offensive | Link
Sun 11 Dec 2005 16:55
406 HDI Fuel/Oil Temp Gauge Fault - David Horn
Are you sure you still have oil in the engine?!!
Reply | Report as offensive | Link
Sun 11 Dec 2005 17:03
406 HDI Fuel/Oil Temp Gauge Fault - backatthepostbox
...yes there is still oil in the engine....:-)
Reply | Report as offensive | Link

It's FREE to list your classic car on Honest John Classics and promote it to thousands of classic car buyers, owners and enthusiasts on what is one the UK's biggest classic car sites.

Sell Your Classic Car For FREE