hi this car radio is out of a vauxhall, i need the wiring for the damn thing if anybody can help? ie, live,neutrel,speakers,wires etc,etc its mind bogling!!!!
|
There is a SC303 with an integrated display & one for a remote display. Not sure which one you have. The Cavweb forum describes the wiring here - probably for the one with an integrated display: www.cavweb-forums.co.uk/showthread.php?t=10937
If it is more than 5 years old (which it probably will be) then some part of the cassette mechanism will most likely have broken - and some of the elements of the pop-off display will have stopped working. They are not that tough. Dynamic Dave will be along shortly with a link but there are wiring adapters available to convert the Vauxhall plug to suit other makes of vehicle which might be easier if you aren't putting it into a Vauxhall.
|
Dynamic Dave will be along shortly with a link
The only link I can supply is one to Autovaux for a replacement removable display panel, should it need one. The following link is for an Astra SC303 (it'll be the same), as I was unable to find the correct one for the Corsa. All the Corsa ones listed were for Car400 & CCR600's. Best to ring them first to confirm.
www.autovaux.co.uk/StockItem.asp?AVCode=AVEL&AVNo=...9
Can't help with the rest, apart from the stereo will have a plug on the back that confirms to DIN style wiring that is common in most vehicles these days (plug and play) APART from a couple of power connections which may need to be switched around as Vauxhall tend to wire them up differently for whatever reason.
|
Sorry DD .... this is what I meant:- www.nexxia.co.uk/head_unit_fitting_kits/ISO_Connec...m
There is a whole section for Vauxhall.
|
|
great ive powered up the radio it lights up but it says SAFE? is this it needs a code? the no:90 355 877 type sc303d (c) any ideas its a cheapy replacement for the wifes fiesta!!
|
great ive powered up the radio it lights up but it says SAFE? is this it needs a code?
Yep. Can't use it until you've unlocked it. If you've got the code, make sure the set is turned off, then turn the ignition on, hold down button AS and turn on the stereo. Wait for the beep, then release button AS. Display should now have 4 dashes ----. Enter correct code using the radio preset buttons 1 to 4. Once code is entered, press and hold down button AS again until code is either confirmed or denied. WARNING - you only have a max of 10 attempts to get it right, but if still no luck after the 8th attempt, STOP and contact a Vaux dealer.
|
|
|
|
thanks very much for the link! this is a very helpfull site lots of great topics! thanks again. tony. leeds. westyorks
|
bigtee unless you can get it recoded for nowt i suggest you dont proceed these corsa radios as victorman said are poor quality and throw up all kinds of wobblies,i would suggest you buy an aftermarket radio for the ford and if you buy the lead to match from halfords or maplins in leeds the job is done
hope i havnt confused you
|
|
|
|