Hi all,
Could anyone explain how easy and roughly how you fit wheel bearings (front and back) to a ford fiesta 1991 1.6 XR2i. Is it within the scope of a competent DIYer and do I need any specialist tools. As I can't find the procedure in the Haynes Manual.
Many Thanks
Steveo
|
I would think if Haynes has no mention.They are of compression type bearing into hub.. fronts will be.In which case specialist tools are needed..Unless you know what you are doing. best left to the experts..IIRC rears are taper bearings. Though may be wrong on the 91.
--
Steve
|
|